Tecomid NG has excellent toughness and stiffness. It is characterized by low moisture absorption and above-average above-average dimensional stability. Whether it is fillers or reinforced, it retains an exceptional exceptional surface.

Lower moisture absorption than PA6 & PA66. Excellent Chemical and hydrolysis resistance. Higher heat resistance and mechanical properties than PA12.

Processed from agricultural materials (castor oil etc.) into biopolyamides. Tecolen-/Tecotekbio with partial organic content, (wood fibres/flour, bast and leaf fibres) + organic (consumer and agricultural waste) + filling and reinforcing materials with petroleum-based PP, ABS and PE polymers.100 100% biodegradable: Tecobio® made of PLA, PBS, TPS and PBAT as well as natural or synthetic reinforcing materials and additivesThe properties are improved by the use of materials with organic content (wood fibres/wood flour, bast fibres and leaf fibres) and organic (consumer and agricultural) waste.

Recycled material from industrial waste such as textile fibres, and consumer waste such as containers, crates, bottles. Recycled polymers as well as recycled glass, carbon, aramid and mineral fillers ensure "near to prime" quality.Usable in a wide range of applications such as E&E, household items, sports&leisure, automotive, furniture and many more.Outstanding properties in terms of heat resistance, stiffness,chemical resistance and electrical insulation. Typical applications are automotive "under the hood", E+E, medicine, mechanical engineering and chemical engineering.

PEEK is the high-performance material par excellence that achieves top marks in all properties. It is used in aerospace technology, automotive and mechanical engineering, in high-voltage and semiconductor technology and in medicine.

Excellent stiffness and mechanical strength Very good thermal stability Very low moisture absorption and good dimensional stability Very good electrical resistance Excellent surface aspect

PPS is a high-performance plastic with outstanding properties in terms of heat resistance, rigidity, chemical resistance and electrical insulation. Typical applications are automotive "under the hood", E+E, medical, mechanical and chemical engineering.

High-quality standard parts for temperature regulation are essential for the quality of the parts and for reliable production without downtimes.

ST Systems test inks are a quick and easy way to determine the wettability (surface tension) of a material surface. The test ink is applied to the surface using a brush or pen. A wettability of at least 38mN/m is a prerequisite for successful printing, foaming and other further processing. To determine the surface tension of a surface, a test ink is used whose surface tension corresponds to the value of the surface to be tested. The behavior of the applied ink provides information about the properties of the surface. If the ink contracts within three seconds, the surface tension of the surface is lower than that of the ink. In this case, the adhesion forces of the surface material are still too weak. If the ink sticks in the form of a continuous line, the surface energy of the substrate is at least as great as that of the ink.

MLAnalytics ist Ihr kompetenter Partner für Material- und Bauteilprüfungen. Unser Labor steht für die Probekörperherstellung sowie mechanische-, thermische-, rheologische und optische Werkstoffprüfungen zu Ihrer Verfügung. Wir freuen uns auf Ihre Anfrage.

Plastic products accompany us throughout the day - and throughout our lives. The focus is often on safe function, high practicality and a long service life. For example, when it comes to medical products on which human lives depend or building products that are expected to have a long service life, the SKZ's comprehensive testing expertise is in demand. Our own SKZ mark also certifies your products as a seal of quality that they meet the highest quality requirements.

The building permit has been granted and the excavation pit has been dug, so now we can finally get started. Our large clean room project is entering the construction phase and will be available from 2026, offering even higher-quality manufacturing. We already manufacture your prototypes and small production runs to ISO 9001 and ISO 14001 standards. Furthermore, we have expanded our quality assurance services to include optical measurement, process validation and qualification, as well as series testing.

It is plant-based, rapidly biodegradable, cold and hot water resistant, dishwasher safe, tasteless, food safe, climate friendly, and super stable and it's really cool!

Want to utilize more efficient and environmentally sustainable cleaning methods? Want to lower your Greenhouse Gas (GHG) emissions score? Start using dry ice. It's no secret that sustainability and ESG initiatives are rising to the top of the corporate priority list and dry ice aligns well. The feedstock for dry ice comes from recycled CO2 as part of a carbon capture & utilization process from numerous industrial by-products. Plastics processors are aligning their corporate goals to remain responsible, competitive and resilient. Utilizing dry ice in several applications in plastics processing is helping the industry move into a circular economy to better protect our environment. How? The CO2 utilized for the production of dry ice is a carbon capture and utilization process that involves using recycled CO2, and replaces environmentally harmful solvent cleaning processes. Mold cleaning remains a critical component of producing quality products. Cleaning mold cavities and vents of resin off-gasses, cured material or mold release agents can prevent numerous common molding problems such as short shots, burns, flash, contamination, etc. Cleaning is often delayed because traditional methods cause extended downtime and often involve the use of chemicals or mechanical means that are harmful to employees, abrasive to the tooling and can wear away critical mold tolerances. We understand this problem and offer solutions to clean molds more often, faster, cheaper and non-abrasively and in an environmentally sustainable manner. Cold Jet’s Dry Ice Environmental Cleaning and Surface Preparation (ECaSP) systems present a proven solution to accomplish productivity, quality and cost reduction initiatives that many plants are pursuing. Dry ice is also utilized in our industry to deburr and deflash plastic parts. Thermoset parts will always have flash (sometimes thermoplastic parts as well), and the part geometries do not always lend themselves to tumbling.

🛠️ No more time-consuming cost estimates! Does this sound familiar? You are planning a project with extruded plastic profiles, and until now, cost forecasting has been a very time-consuming process. Valuable time is spent on estimates or calculating quotations. That's now a thing of the past! K-Profile has developed a solution that will revolutionise your planning process. With our new, intuitive online calculator, you no longer have to wait days for a cost forecast – you get it in a flash. Your time is valuable. Get a cost estimate in just a few clicks. The project goal is getting closer. ➡️Discover now: the new K-Profile calculator displays costs easily and fast !