
NBR 70 for Vehicle Interiors: Burning Behaviour According to DBL 5307.10
Our NBR compound 3H70B34 with 70 Shore A meets the burning behaviour requirements of DBL 5307.10 – tested in 2025 by a DAkkS-accredited laboratory. For seals and moulded parts in vehicle interiors.
Our NBR compound 3H70B34 with 70 Shore A has been tested for burning behaviour by a laboratory accredited to DIN EN ISO/IEC 17025. Testing was carried out according to the requirements for materials used in vehicle interiors.
Results according to the test report (10/2025):
DBL 5307.10 (2022-11): requirement (burning rate < 100 mm/min) met
Maximum measured burning rate: 28.4 mm/min
This makes the material suitable for seals and moulded parts in vehicle interiors. NBR also offers good resistance to oils and fuels. From 3H70B34 we supply O-rings, moulded parts and flat gaskets to your specification. The test report is available on request.
Visit us at KPA in Ulm, booth 2-C21.

Other news

EPDM 60 and 70 for Drinking Water: Approvals for Germany, the UK, France and the USA
Our EPDM compounds 3E60B11P (60 Shore A) and 3E70B03P (70 Shore A) are approved for drinking water in Germany (KTW-BWGL), the UK (WRAS), France (CLP/ACS) and the USA (NSF/ANSI 61).

EPDM 70 for Vehicle Interiors: Burning Behaviour According to FMVSS 302 and DBL 5307.10
Our peroxide-cured EPDM compound 3E70B06P with 70 Shore A meets the burning behaviour requirements of FMVSS 302 and DBL 5307.10 – tested by a DAkkS-accredited laboratory. For seals in vehicle interiors.

HNBR 70 for Vehicle Interiors: Burning Behaviour According to FMVSS 302 and DBL 5307.10
Our HNBR compound 3D70B09 with 70 Shore A meets the burning behaviour requirements of FMVSS 302 and DBL 5307.10 – tested to DIN 75200 by a DAkkS-accredited laboratory. For seals in vehicle interiors.

DIN-DVGW Certificate According to DIN EN 549 for Gas Applications
Our NBR material NB70-S3200/B5-73898 with 70 Shore A is DIN-DVGW certified according to DIN EN 549 (reg. no. NG-5112BR0211). For static and dynamic seals in gas appliances and installations from -20 to +80 °C.

Silicone for Hot Applications: OM5 Certificate According to (EC) No 1935/2004
Our silicone compound 3L65T01P with 65 Shore A is now available with an OM5 certificate for food contact according to Regulation (EC) No 1935/2004. This makes it suitable for high-temperature applications with food contact.

OM2 Certificate for Food Contact According to Regulation (EC) No 1935/2004
Our silicone compound 3L65T01P with 65 Shore A is now available with an OM2 certificate for food contact according to Regulation (EC) No 1935/2004. This makes it suitable for long-term food contact at room temperature.