
EPDM 60 and 70 for Drinking Water: Approvals for Germany, the UK, France and the USA
Our EPDM compounds 3E60B11P (60 Shore A) and 3E70B03P (70 Shore A) are approved for drinking water in Germany (KTW-BWGL), the UK (WRAS), France (CLP/ACS) and the USA (NSF/ANSI 61).
If you supply fittings and components to several countries, you need seals with the right approvals. With our EPDM compounds 3E60B11P (60 Shore A) and 3E70B03P (70 Shore A), you cover the key drinking water requirements in Europe and the USA, in two hardnesses.
For both materials:
Germany: certificate of conformity to the UBA evaluation criteria (KTW-BWGL), risk group P2 (incl. P3), cold and hot water 23–85 °C, valid until 09/2029
United Kingdom: WRAS Approved Material to BS 6920, water up to 85 °C, valid until 02/2029
France: CLP conformity for seals up to 63 mm diameter, valid until 10/2028
USA: certified to NSF/ANSI 61 for O-rings and gaskets
Additionally for EPDM 70 (3E70B03P):
France: ACS for cold, warm and hot water, valid until 11/2030
FDA 21 CFR 177.2600: requirements met (test report)
USP Class VI: requirements met (test report)
From both materials we supply O-rings, flat gaskets and moulded parts to your specification. Documentation is available on request.
Visit us at KPA in Ulm, booth 2-C21.

Other news

NBR 70 for Vehicle Interiors: Burning Behaviour According to DBL 5307.10
Our NBR compound 3H70B34 with 70 Shore A meets the burning behaviour requirements of DBL 5307.10 – tested in 2025 by a DAkkS-accredited laboratory. For seals and moulded parts in vehicle interiors.

EPDM 70 for Vehicle Interiors: Burning Behaviour According to FMVSS 302 and DBL 5307.10
Our peroxide-cured EPDM compound 3E70B06P with 70 Shore A meets the burning behaviour requirements of FMVSS 302 and DBL 5307.10 – tested by a DAkkS-accredited laboratory. For seals in vehicle interiors.

HNBR 70 for Vehicle Interiors: Burning Behaviour According to FMVSS 302 and DBL 5307.10
Our HNBR compound 3D70B09 with 70 Shore A meets the burning behaviour requirements of FMVSS 302 and DBL 5307.10 – tested to DIN 75200 by a DAkkS-accredited laboratory. For seals in vehicle interiors.

DIN-DVGW Certificate According to DIN EN 549 for Gas Applications
Our NBR material NB70-S3200/B5-73898 with 70 Shore A is DIN-DVGW certified according to DIN EN 549 (reg. no. NG-5112BR0211). For static and dynamic seals in gas appliances and installations from -20 to +80 °C.

Silicone for Hot Applications: OM5 Certificate According to (EC) No 1935/2004
Our silicone compound 3L65T01P with 65 Shore A is now available with an OM5 certificate for food contact according to Regulation (EC) No 1935/2004. This makes it suitable for high-temperature applications with food contact.

OM2 Certificate for Food Contact According to Regulation (EC) No 1935/2004
Our silicone compound 3L65T01P with 65 Shore A is now available with an OM2 certificate for food contact according to Regulation (EC) No 1935/2004. This makes it suitable for long-term food contact at room temperature.